Disc Brake Conversion Parts
SWAP.3 1968-1973 Mustang based front disc brake system parts
Note specific parts for 68-73 Mustang, will fit many 60's Ford vehicles.
1968-73 Mustang Type single piston caliper, corrosion protection coated. Banjo outlet. Includes both the right and left side parts. New, no core charge.
P/N 4012/3 $129/set
1964-66 spec high strength alloy steel spindle kit. The kit includes knuckles, caliper brackets, a shield kit, and grade 8 mounting bolts. Has 1964-66 correct steering and suspension geometry. Uses 70-73 type rotor, bearing, and wheel hardware set. Includes both the right and left side parts.
P/N GSK.65b $439/set
1967-73 spec high strength alloy steel spindle kit. The kit includes knuckles, caliper brackets, a shield kit, and grade 8 mounting bolts. Has 1967-73 correct steering and suspension geometry. Uses 70-73 type rotors, bearing, and wheel hardware set. Includes both the right and left side parts.
P/N GSK.67 $439/set
1968-73 type front disc brake dust/splash shield set, semi-gloss black coating, also includes foam gaskets, mounting flanges, 6 mounting bolts, and threadlocker. Includes both the right and left side parts.
P/N SK.3 $89/set
1970-73 11.06" front disc brake rotors. Includes both the right and left side parts.
P/N 5404set $134/set
1970-73 Mustang type front disc brake wheel bearing and seals kit, 2 ea inner bearings, outer bearings, and wheel seal, no races. Includes both the right and left side parts.
P/N BAS.2 $29/set
1970-73 Mustang type front wheel hardware kit, 2ea bearing washers, spindle nuts, nut retainers, cotter pins.
P/N WHS.2 $12/set
1970-73 Mustang front caliper hardware kit, 2 ea caliper shields, 4 ea caliper guide pins (bolts), 2 ea caliper banjo bolts, 4 ea hose gaskets, 4 ea caliper mount bushings, 4 front anti-rattle pins and clips, 4 ea rear anti-rattle clips.
P/N CHS.3 $29/set
1967-70 rubber front disc brake hose set, 7/16" female inlet fitting, banjo outlet fitting. Includes 4 ea hose gaskets. Includes both the right and left side parts.
P/N BH6770 $36/set
1971-73 rubber front disc brake hose set, 3/8" female inlet fitting banjo outlet fitting. Includes 4 ea hose gaskets. Includes both the right and left side parts.
P/N BH7173 $36/set
68-73 Mustang type front disc brake pad set. Includes both the right and left side parts.
P/N P34 $19/set
Adjustable proportioning valve.
P/N APV.1 $32 each
Adjustable proportioning valve, under the master cylinder mounting bracket and mounting hardware.
P/N APV.2 $46 each
Manual type disc/drum master cylinder (new), includes adapter fitting and an adjustable pushrod and an all metal bench bleeding kit.
Fits Ford specification boosters.
P/N 11682A $69 each
Power type disc/drum master cylinder (new), includes an adapter fitting and an all metal bench bleeding kit. Fits Ford specification boosters.
P/N 71248 $59 each
